Description
CTG is a family of “core balance transformers”.
These devices detect the difference in the current flow on the lines running through the coil.
They work on either single phase or three-phase mains.
When the vectorial sum of the current flowing to the load and the one flowing on the NEUTRAL cable (if present) is different from “0” (zero), a current on the CT secondary circuit is generated.
The current difference is usually caused by a leak which may cause an hazard.
The output signal can be used by a residual current monitoring device which will disconnect the monitored load or send an alarm signal.
Benefits
• High sensisitivity.
• Wide range.
• Easy installation.
Features
Protection Degree | IP 20 |
Weight (packaging included) | CTG035: Approx. 80 g
CTG050: Approx. 100 g CTG070: Approx. 125 g CTG120: Approx. 235 g CTG160: Approx. 1220 g CTG210: Approx. 1860 g |
Dimensions (mm) (WxHxD) | CTG035: 64 x 74 x 20 mm
CTG050: 87 x 98 x 20 mm CTG070: 105 x 117 x 20 mm CTG120: 155 x 170 x 20 mm CTG160: 241 x 254 x 33 mm CTG210: 290 x 304 x 33 mm |
Internal diameter | CTG035: 35mm
CTG050: 50mm CTG070: 70mm CTG120: 120mm CTG160: 161mm CTG210: 210mm |